Homepage | Set Home | Add to Favorites
Member

Honor Pipeline Co., Ltd


Products
  • No Category
Search
 

Friends links

3pe Coating Ssaw Pipe
Click image to view full size image
Product: Views:2603pe Coating Ssaw Pipe 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2024-08-19 09:38
  Inquiry
Details
3PE Coating SSAW pipe of DN3200 MM

 

Since 2023, we have produced many 3PE Coating SSAW pipe of DN3200 MM, and we export these pipes to Egypt for Nile drinking water project. We have rich experience and advanced equipment for producing 3PE Coating SSAW pipe of DN3200MM.

 

Size

OD: 219mm-3200mm

Wall Thickness: 5mm-30mm

Length: 6m-18m or base on client's requirement

Surface Treatment

1) Bared
2) Black Painted (varnish coating)
3) Galvanized
4) With Oiled
5) 3 PE, FBE, corrosion resistant coating

Type

Welded Pipe

Delivery

1) Container
2) Bulk carrier

Port of Shipment

XinGang Port, Tianjin, China

Date of Delivery

According To The Quantity And Specification Of Each Order

Payment

L/C at sight, T/T

 

Features Specification

 

1. 3PE Coating SSAW pipe (3LPE Coating Spiral Steel Pipe, 3PE-anti-corrosive Steel Pipe)
Anti-corrosion steel pipe plays important roles in the current engineering service, such as the 3PE anti-corrosive pipe. It has good corrosion resistance, low water absorption, high mechanical strength properties.
It is suitable for the water supply and drainage, positive and negative pressure ventilation, fire sprinkler pipe network, gas supply engineering, underground water pipeline and oil pipeline.

 

2. The brief introduction of 3PE Coating SSAW Pipe
External Polyethylene Coating for Pipe This Standard covers the following coating systems:

(a) System A1: a coating that consists of an adhesive and a polyethylene outer sheath;

(b) System A2: a coating that consists of an adhesive and a polyethylene outer sheath that has more stringent peel adhesion requirements than those for System A1;

(c) System B1: a coating that consists of a liquid or powdered epoxy primer, a polymeric adhesive, and polyethylene outer sheath;

(d) System B2: a coating that consists of a powdered epoxy primer, a powdered copolymer adhesive, and a powdered polyethylene outer layer.

 

3. 3PE Anti-corrosion Coating Process

 

4. Din 30670 Standard require the thickness for 3PE Coating SSAW pipe

Nominal size of pipe

Minimum thickness of normal coating (MM)

Up to DN 100

1.8

Over DN100 Up to DN 250

2.0

Over DN250 to Below DN 500

2.2

From DN 500 to Below DN 800

2.5

From DN 800

3.0

 

https://www.honorpipeline.com/

Inquiry